E20

750mls (1 kg) hexagonal jar made in New Zealand from clear PET with black tamper proof lid.  These quality jars are sold in packs of 4 for your convenience.

Hive World supplies the Hive Doctor Smart Base with Triple […]

Our Hive mat kitset includes kiln dried rims with a tempered hardboard sheet for a durable product to use in your hive.

The hive mat is used as an insulator and to prevent your hive lid from being stuck down by over-active propolizing bees.  You can sit your top feeder on it and make a small hole for the bees to enter the feeder.  This works particularly well with the Hive World Top Feeder as it has its own lid to keep the bees insulated from the weather.

The 40mm rim hive mat can be used as an escape board.  Firstly,  make a hole in the mat then screw a bee escape (either an 8-way or porter style) on top.   Place it underneath the supers you are wanting to harvest.  The deeper rim allows for the addition of the bee escape:  this means it will fit comfortably between the hive boxes.

We also supply a nuc hive mat to fit your nuc boxes.  Check your options below:

(For quantity pricing, please call us.)

The Big Brute hive tool is a serious tool for serious beekeepers.  No propolis will be able to stand against this.  Guaranteed to get your supers apart with ease.

This mighty tool is manufactured by us from 5 mm high tensile steel and is 320 mm long.   However, it  still fits on our HiveWorld Bee Belt so you won't lose it!

Honeysticks Colouring Books are available from Hive World NZ: Two […]

Stainless Steel Pail perch can hold pails up to 20 L capacity.

An easy, clean way of emptying your honey pails:  enables you  to leave your pails to drain while you are occupied with other tasks.  Securely holds your pail while it drains into your storage containers.

Paradise 10L Feeder to use with your Paradise hiveware.

Ergonomic design fits seamlessly between your beebox and the hive lid.

Supplied with 1 x polycarbonate bee saver.

Pricing breaks available for 10 x product, 50 x product and 100 x product.  Please contact us for quotation either on phone:  0800 000 770 or email: [email protected]

Paradise Langstroth Body + 4 plastic profiles to protect the edges.  Available in Full Depth or 3/4 Depth sizes.

A long-lasting lightweight option for your hiveware.  Paradise EPS100 (Expanded Polystyrene) is an amazingly strong product that will last up to 30 years.  Its excellent thermal performance provides a healthy environment for your bees all year round.  Keeps the cold and damp out through winter and protects the hive from excessive heat in the summer.

As a result, your bees can use their energy to build up the honey reserves and expand the hive early in the season as they are not wasting their energy keeping the hive at an ambient temperature.

Hiveworld supplies the Paradise Queen Excluder to go with our […]

Hive World supplies the Queen Trap System as part of the Paradise range.  It fits the Paradise bee boxes perfectly of course.  However you can still use with the regular timber supers, it just overhangs the edges.

The Queen Trap System works by providing an additional opening for the bees above the queen excluder allowing the beekeeper to close off the lower entrance to the brood box.  This therefore keeps the queen safe inside and unable to swarm.

Perfection Honey gate manufactured in France by Thomas Apiculture.  Available in three sizes:  32mm, 40 mm, 50 mm.

The Perfection Honey Gate used worldwide is a model of French ingenuity and efficiency.  Developed by Thomas Apiculture's own design team, its unique "drip-cutter" principle allows clean accurate honey filling.  The elbow on the outlet pipe slows down the stream of honey to allow greater control.   The improved leak-proof adjustable spring-loaded cut-off valve will outlast any other gate's performance.  It cuts off the honey flow cleanly, making jar filling an easy job.  Equipped with an ergonomic handle for easier control of the honey flow.  The 32 and 40mm gates come with seal and nut to fit any extractor, pail or honey tank.  The 50mm is designed to use in your large drum and therefore doesn't require seal and nut.

This is the ORIGINAL Perfection Honey-gate manufactured in France:   Don't be tempted by vastly inferior copies.

Product +

• Internationally renowned
• Optimizes the filling
• Facilitates bottling
• Easy grip - ergonomic handle
• Long lasting, virtually unbreakable
• 32 mm requires a 42mm hole
• 40 requires a 47 mm hole
• 50 will fit into the 50BSP thread in a 200 litre drum.